Optimal specifications for beam calibration checks in radiotherapy calculated with gauge repeatability and reproducibility, and sensitivity and specificity studies
Por:
Lopez-Tarjuelo J, Bonaque-Alandi J, Vidueira-Martinez L, Garcia-Pinon F
Publicada:
1 feb 2017
Resumen:
Introduction. Several medical physicists have moved to a statistical process control-oriented approach to learn more about the intrinsic performance of radiotherapy equipment. Our aim is to report how gauge repeatability and reproducibility (R&R) and sensitivity and specificity studies can provide optimal specifications for radiotherapy-beam calibration checks. Methods. A team of three medical physicists performed gauge R&R studies on 6 megavolt (MV) photon, and 4, 9, and 15-megaelectron volt electron-beams. The operator order was randomized to reduce time-related biases. Checks were performed accurately using ionization chambers with a water phantom. These gauge R&R studies allowed us to determine the proportion of variation due to the repeatability, operator, and beam-to-beam components associated with repeated beam-calibration checking. We then calculated the conditional probabilities of misclassifying the check results as a false accept (beta = 1-sensitivity) and a false reject (delta = 1-specificity) by changing the beam calibration specifications. Using this information we plotted the receiver operating characteristic curves in order to identify the sensitivity and specificity settings that maximize detection. Results. The main component of variation was due to the operator; the repeatability component was less than 30%. The intrinsic variation component for 6 MV photon-beams was approximately 20%, whereas it was over 34% for electron-beams. The optimal specification bands expressed as a percentage of the mean were +/- 0.7% for 6 MV photons and +/- 0.9% for electron-beams. Optimal sensitivity was over 50%, whereas specificity was not less than 0.995. The very low d indicates that the system is unlikely to reject a correct beam calibration. However, the high beta shows that should we require high levels of precision and therefore adopt such optimized specifications, the probability of accepting a drifted beam calibration would be fairly high. Therefore, the combination of 'medical physicist, water phantom, and ionization chamber' is an excellent tool for correctly adjusting beam calibrations to their specifications; moreover, this procedure could also be further improved in order to detect drifts in beam calibrations if the specifications required were to tighten in the future. Conclusion. Calculating the optimal specifications is feasible and leads to a very high detection specificity, but with low sensitivity. The operator-associated variation component contributed the most to the overall variation in check results. The beam calibration procedure might need to be adapted if the demand for precision in radiotherapy increases.
Filiaciones:
Lopez-Tarjuelo J:
Consorcio Hosp Prov Castellon, Serv Radiofis & Protecc Radiol, Avda Dr Clara 19, Castellon De La Plana 12002, Spain
Bonaque-Alandi J:
Fdn Hosp Prov Castellon, Avda Dr Clara 19, Castellon De La Plana 12002, Spain
Hosp Univ & Politecn La Fe, Serv Oncol Radioterap, Unidad Radiofis, Avda Fernando Abril Martorell 106, Valencia 46026, Spain
Vidueira-Martinez L:
Fdn Hosp Prov Castellon, Avda Dr Clara 19, Castellon De La Plana 12002, Spain
Garcia-Pinon F:
Fdn Hosp Prov Castellon, Avda Dr Clara 19, Castellon De La Plana 12002, Spain
|